Jump to content

FSX Fiber Accelerator


JOSETI

Recommended Posts

Flight Simulator Platform Solutions presents FSX Fiber Accelerator, a product that will take FSX again to the peak, where it belongs !

FSX tweaking over the years was made -mostly- by making changes on fsx.cfg . That is the FSX settings file.

All changes – despite how good they were – are static, as when you load FSX these changes stay until you quit FSX and insert another tweak again.

This leads to problems: Either you had found a perfect setup for around a heavy airport but you would lose graphics quality on other places, or you had found the perfect setup for high lever flying but when close to the ground things went bad, or you had a "just average" all-around set up.

How about forcing FSX to be more clever and provide it with a way that keeps frames high at the best possible graphics quality, or lower frames to keep up with the graphics demand , according to your needs? How about

Dear Simmers, FSX Fiber Acclerator is here ! For the first time in FSX, we directly, in real-time, dynamically inserting FSX tweaks without touching fsx.cfg. Using revultionary techniques we draw power from where you DON'T need (in example while you are on the ground, from drawn graphics 80 miles away) and bring you this power to where you DO need (in example to better frame rate and better graphics quality around the airport).

By – in other words – rewritting the FSX graphics engine, FSX now gives to Simmer what he need , when he needs it !

Better frame rates, better graphics quality, faster texture loading, smoothness in motion all together in the same flight! Maximizing the CPU and GPU power for FSX was never easier.

Doing what? Like updating FSX with a new fsx.cfg every millisecond !

How it works:

You start FSX and set a "Target Frames" in settings. (This will be the top number your FSX will get on the less demanding situations)

You start FSX Fiber Accelerator, and you set a "Lower Frames per second" target. This will be the number of frames FSX will try to catch up, according to your needs, lowering graphics quality (always gradually from places you cannot see anyway, moving closer to your position).

You then go to the hardest (i.e. the most frame-killer you got) airport you own. You test some settings until you find the best one. That's it.

All is later done afterwards by FSX Fiber Accelerator and it will work perfectly on all other airport as you configured it for the worst possible scecario.

Next time you just start FSX and FSX Fiber Accelerator... Nothing more to do, made to be as simply as possible, it is start-and-forget.

Main Features:

  • Best possible fps at any given situation with maximum possible graphics quality.
  • Best possible graphics in FSX quality according to the frame rate you set for the hard cases.
  • Best possible smoothness on texture loading during even the hardest viewpoing change.
  • Maximum CPU and GPU allocation to FSX during the whole flight.
  • Dynamically applying (every millisecond) the best possible tweaks to your FSX.

What it cannot do? Well it is not buying you new hardware. It just makes absolutely sure that the one you have will present FSX to the zenith , as best as it can do. To hard to believe it?

We agree. Download the demo from HERE to get the free try-before-you-buy chance to believe... (5 single uses of the application , for 5 minutes each) Do your tests where you know you PC barely makes it, and be amazed by the results.

Then we are sure, we will welcome you to FSPS family as the only possible next step would be you become a proud owner of FSPS – FSX Fiber Accelerator .

Requirements section:

 

MUST TO BE RESPECTED REQUIREMENTS (NOT "MINIMUM")

FSX Fiber Accelerator, can run at any PC that is able to run Microsoft's FSX .

Requirements:

 Windows: XP SP3 / Vista / Win 7 – 32 or 64 bit / Win 8

 Flight Simulator X – Service pack 2 or Acceleration pack

 Microsoft's NET Framework 3.5 SP1

 Latest Version of FSUIPC by Peter Dowson. (Registered or unregistered)

 Up and running internet connection for activation and license checking of the

product on each application's start-up.

 PDF viewer application for reading the manual.

 FSX Fiber Accelerator is compatible with:

ALL tweaking applications (i.e. FSX Booster 2013) , ALL tweaking guides

available on webpages or forums, ALL websites that use web-services

where user could submit his PC specs and get back a recommended fsx.cfg

etc…

Limitations:

• One active installation on only one PC at any given time. (Checked via online

validation after every installation.) Users can have the application installed on

multiple computers moving the active license around, using the “Transfer

License” function.

• FSX Fiber Accelerator must run on the FSX PC in order to communicate directly with FSX.

 

http://store.thefsps.com/product_info.php?products_id=54

 

Después de unas 4 paginas en el foro de avsim diciendo la gente que esos 5x5 min no eran suficientes han publicado el siguiente mensaje en el foro.

 

 

Hi all,

first of all, our initial thought after reading SOME posts was to delete AVSIM forum from our bookmarks and never look back.

On the other hand some user's input and numerous PM I got , made me to decide to just disregard the offenders , non believers or simple trolls who used the well old known methodology of "SnakeOil" . We leave them to their misery, as there are many respectable users here, that need us on their side.

For those interested:

We repacked the demo (same link) you can find it at the product page

We added as you requested - despite this is, technically and programming speaking, a risk for exploitation - a 5 tries x 60 minutes demo period.

We also changed the software ID so even those who had reached the zero limit , would again try for 5 times x 60 minutes using the new installer.

We made an installer to avoid the 4 most common error user may do:

- Running the exe from inside the zip without extracting

- Not having FSUIPC installed (it now asks for it)

- Not having .Net 3.5.1 installed (now asks for it)

- Your simulator is not updated to SP2 or Accel. Pack level.

Plus we added some instructions for basic RTFM, because many expected from the application to buy for them a new CPU and some Gigs of RAM, and do it without bothering even to read the full version's manual that is included.

FSPS was always a company that heard its customers (or its potential ones) and having absolute faith in our application said "why not ? "

----

We will be around...

Sacado de:http://forum.avsim.net/topic/445641-fsx-fiber-accelerator/page-5

 

En cuanto termine el vuelo que me estoy haciendo saco el Concorde en EGLL xtreme v3.

 

Un saludo.

Link to comment
Share on other sites

por probar... normalmente los tweaks estos se pueden hacer manualmente, pero al haber demo tampoco cuesta nada.

es cierto, pero es imposible hacerlos en tiempo real. Es lo que hace este programa. Según parece va calculando los fotogramas que tienes y te va ajustando tu config (sin sobreescribirlo para que no te fastidie nada) internamente para que se adapten los fotogramas en situaciones bajas de frames. Vamos que cuando llegas o sales de tu aeropuerto y vienes de 30fps mantenido y te baja a 19fps o así.. te lo mantenga en unos 25 o lo que pongas para que el vuelo sea suave, quitándote algún arbol, autogen, texturas menos definidas.. etc (luego lo vuelve a subir cuando recuperas los fotogramas).

 

Probado y parece funcionar bastante bien.

Edited by Japo32
Link to comment
Share on other sites

Después de probar la Demo un ratillo, puedo decir que funcionar,... funciona.

 

Pero en equipos justillos como el mio, tiene sus inconvenientes, me explico:

El programa lo que hace es el reparto, en tiempo real, (esa es la gracia) de la carga de trabajo del microprocesador, a través del FIBER_FRAME_TIME_FRACTION "de ahí el nombre del programa".

O sea, prioriza la carga de escenarios, o la creación de polígonos. En escenarios muy cargados de polígonos (lo he probado en Cleveland X, pero sirve cualquiera), va a dar prioridad a la generación de estos, y va a dejar de banda la carga del terreno. Va a incrementar los frames por segundo, lo cual ayuda, pero va a descuidar totalmente el terreno (intentando subir frames).

Cuando se despega del aeropuerto vas a ver la ciudad relativamente mejor que antes(más frames), pero el terreno quedará hecho unos zorros.

Porque en definitiva de donde no hay, no sale. Si el ordenador es justillo va a priorizar siempre los frames/polígonos a costa de "dibujar mal" el terreno.

 

Otra cosa será en un equipo mejor y más descargado, es allí donde creo merecerá más la pena, ya que en momentos puntuales dejará de banda el terreno para centrarse en polígonos. Aunque imagino difícil un ordenador descargado de trabajo, pues cuanto mejor es, más carga se le va a dar de base y vuelta al origen...

 

Esta es mi experiencia en un Q6600 y una Nvidia 460GTX.

 

Un saludo.

Link to comment
Share on other sites

Habláis de escenarios... ¿pero de aviones? Me refiero a aviones complejos, PMDG, Level D, iFly... ¿Tiene aplicación esta utilidad?

Hace años que no lo uso, pero el 744 de PMDG en ciertas situaciones es inmanejable precisamente porque el programa se mueve a 5 o 6 cuadros. Está muy mal optimizado.

Link to comment
Share on other sites

Habláis de escenarios... ¿pero de aviones? Me refiero a aviones complejos, PMDG, Level D, iFly... ¿Tiene aplicación esta utilidad?

Hace años que no lo uso, pero el 744 de PMDG en ciertas situaciones es inmanejable precisamente porque el programa se mueve a 5 o 6 cuadros. Está muy mal optimizado.

 

Ahí tienes razón, ¿quitará el problema de baja de fps al estar el puntero del ratón presente en pantalla? :icon_mrgreen:

Link to comment
Share on other sites

  • 2 weeks later...

 

Version 1.2 :

Logic change by adding 3 separate adjustable presets. Lower target, Middle Target, FA Deactivated. User now able to select via keyboard or joystick press, the required preset.
Auto-exit logic corrected
Messages inside FSX implemented (to show selectable preset)
Various GUI improvements / corrections
Fiber will now revert fsx.cfg to its default value (of selected FSX Target Frame – that is the only possible change) even if user force-closed FSX before Fiber. To make sure there won't be any error in the process and for extra safety of your setup file Fiber will create an fsx.cfg backup file upon startup at the usual folder.
Auto updater will now notify user if a new update is available.
Various base-code improvements.
Product description & Purchase : HERE
The ability to change - without need to swap to desktop - between the 3 presets will allow you to get the best out of the application.
We also implemented an FSUIPC offset (for those having a registered FSUIPC) so you would change between presets with the press of a joystick button or another cockpit switch.
The offset used is Offset Byte Setbits ,Offset: x78E3 parameter: x64 check manual for more details.
As always with FSPS product evolution will continue. Keep the feedback coming.
Thank you for the trust enjoy the new version!
FULL COMMERCIAL VERSION: DIRECT LINK or via the update button inside the app
DEMO VERSION 1.2 : DIRECT LINK (Users that had lost the ability to use it due to counter reached, can now re-try the demo with the new features)

 

Ahora limitado a 5 testeos de un máximo de 60 minutos.

 

http://forum.simflight.com/topic/77231-fsx-fiber-accelerator-out-now/?p=469945

Link to comment
Share on other sites

ufff, el problema que le veo yo (que supongo que no lo habrán cambiado) es que tienes que tener sí o sí, el Framework 3.51 creo que era, y ya vamos por la 4.0. Demasiado rollo para conseguir un aumento de algunos frames como dicen por ahí, porque he oido de todo, que si va bien, que si no, etc...

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

Some pretty cookies are used in this website